|
Introduction...
Bearings and Bushings
Mechanical components used to reduce friction and carry loads for rotary
or linear motion; include ball and roller bearings, plain bearings,
sleeve bushings, and other configurations.
Belts and Pulleys
Power transmission products used to transmit rotary motion and/or change
the input-to-ouput speed ratios.
Brakes and Clutches
Driveline components used to transmit and control power and relative
motion between two rotating shafts.
Chains and Sprockets
Power
transmission components using toothed sprockets and link chain matched
in size and pitch.
Couplings, Collars and Universal Joints
Mechanical shaft-mounting components for transmitting motion between two
shafts, locking or locating components, or as mechanical stops.
Enclosures
Used for enclosing or containing electrical, electronic, or mechanical
components, or to provide protection for their operators.
Fans and Electronic Cooling
Devices and equipment used to regulate temperature by removing heat from
electrical and electronic components.
Gaging and Shop Tools
Hand tools, power tools and equipment for metrology, inspection and
quality control that are designed for production or machine shop floor
use.
Gears and Gearing
Includes all power transmission gear types and reducers, geometry and
materials, including English and metric designs.
Industrial Heaters and Heating Elements
Electrical resistance heaters or their internal elements; designed to
provide an integrated thermal source for products or systems.
Industrial Tools
High durability hand tools for industrial assembly, cutting, forming or
marking that are often automated or have monitoring capabilities.
Limit Switches
An electromechanical device that requires physical contact of an
actuator to make the contacts change state.
Mechanical Fasteners and Hardware
Components used to fasten or secure one part to another, such as screws,
rivets, bolts, nuts, and clips.
Power Transmission
Belts and pulleys, sprockets and chains, gears, and other drive
components used to transmit power.
Pulleys and Belts
Includes many types of power transmission v-belts, flat belts, timing
belts, round belts, and their associated pulleys.
Seals
Mechanical devices used in static or dynamic applications to separate
two liquids or gasses or prevent the ingress of contamination.
Shock and Vibration Control Products
Mechanical
products used to isolate or control the shock or vibration exerted on a
component or assembly.
Solenoids
Solenoids convert electrical energy into linear or rotary mechanical
work via a plunger with an axial stroke in either a push or pull action.
Springs
Mechanical
elements that extend or retract and return to an unloaded position;
includes extension, compression, torsion, air and gas springs.
Switches
Devices used to route signals by allowing or preventing the signal flow
when in closed or open position.
Links
|
